PERS-2400A Emergency Reporting System Specifications

General Specifications
ELECTRICAL
Primary Operating Voltage:	120 VAC, 60 Hz
Transformer:	UL listed, Class II, plug-in, 16 VAC, 1.25 A (supplied)
Back-Up Battery:	Recommended battery is 12V, 1.2 amp-hour; Linear part number 100104 (order separately)
Standby Current Drain:	80 mA without VB-4, 110 mA with VB-4
Alarm Current:	130 mA
Backup Operation:	32 hours minimum with VB-4 voice board installed in the unit
RADIO RECEIVER
Type:	Diversity, dual superheterodyne
Operating Frequency	315 MHz
Transmitter Capacity:	16 DX or DXS devices
RF Programming Method:	Linear quick-learn
Compatible RF Formats:	Linear DX, DXS
CONSOLE
Radio Zones:	16 supervised
Relay Output:	Form "A" normally open common alarm contact
Contact Rating:	1 amp @ 12 VDC
Control Switches:	Emergency with Braille, Home with Braille "H", Clear with Braille "C"
Indicators:	LED type labeled Power On, Sending, Trouble, and Home
Inputs:	In and out telephone jacks; connection terminals for PD-2 dialer
Programming Method:	Via RA-2400 remote access software
Output Tones:	Distinct alarm tones provided for emergency and fire alarm conditions; provisions for timer reset tone also incorporated into system
Silent Alarm Feature:	Software programmable per channel
Pulse/Tone Dialing:	Software or console programmable
Audible Output:	Integral siren
Operating Temperature:	32° to 120° F (0° to 49° C)
Regulatory:	FCC, DOC, UL 1637
COMMUNICATOR
Dialing:	DTMF or pulse dialing; pulse speed (10 PPS, 60% break, 40% make)
Ringer Equivalence:	0.4 B
Reporting Formats:	4 x 2 or Ademco Contact ID
Telephone Numbers:	Primary, secondary, and supervisory
Reports:	Full transmitter reports, console reports, general system reports, and inactivity
PHYSICAL CONSOLE
Dimensions:	8.75 in L x 7.50 in W x 3.00 in H (222 x 190 x 76 mm)
Weight:	3 lbs. (1.36 kg)

WELCOME TO LINEAR-PERS.COM

PERS-2400A Specifications

Literature

Manuals